Flashlight camera, just as its name implies, is this kind of electronics by putting its hidden camera on a flashlight. It is practical with the function of taking photos, audio and video record at the same time, also lighting. If you need to take video at night, this flashlight camera is your beat choice! 

Picture & Buttons

Technical Data
1)Functions: recording video & audio, taking photo, USB drive, night vision flashlight, web cam
2)Video: AVI, 640*480 resolution
3)Photo: JPEG, 1600*1200 resolution
4)Support Micro SD card/TF card:1GB-32GB(optional)
5)USB: 2.0（Hs）
6)Charging time: 5-6 hours
7)Battery use time: built-in Li battery, recording video & audio for about 3 hours
8)Operation systems: No need for driver installation if the operating system is Windows ME/ 2000/ XP/ Vista or above (Windows98 is excepted)
  
Operation
  
Inserting SD card
Rotary to open the rear cover of the flashlight, insert the Micro SD card/TF card into the SD card slot. When inserting, please let the side with metal face to the USB port.
Note: the device only support “SanDisk” SD card.
  
Switch on
Under power off mode, push the power on/off button for long time, ①、② red lights and ③ green light are on at the same time. Several seconds later, ③ green light turns off,  which indicates it comes to standby mode.
  
Recording video and audio
1)Under standby mode, press record/save button one time, ①、② red lights turn off, ②, ③ green lights keep on, which indicates it is recording.
2)Press record/save button again, ②, ③ green lights turn off, ①、② red lights are on. Which indicating it stops recording and save the recording data then returns to standby mode.
Note: when it last recording, it will save one file every 36 minutes 27 seconds. Ig you want to continue recording, please operation it as the above.
  
Taking photo
Under standby mode, press power on/off/photo button one time, ③ green light blinks once. which indicates one photo is taken and saved. If you want to take more photos, please do the same operation.
  
Switch off
1)Under any mode, press the power on/off/photo button, all the lights are off, indicating it is power off.
2)Under any mode, press the reset button once softly with a clip, all the lights are off, indicating it is power off.
Attention :When it is recording, press power on/off/photo button for some seconds, the device will save the video file then power off. If press the reset button with a clip direct, the video file won’t be saved.
  
Lighting
Under any mode, press LED switch button once, the LED is on, press LED switch button again, the LED is off.
 
Reset
Under incorrect operation or a certain reason, the device may stop working, at this time, insert the clip into the reset hole to reset, and then the device is at power off mode.
Note: when resetting, please click that hole softly.
  
Charging
Being charged by the charger, the green light keeps on, indicating it is being charged. The green light turns off when it is fully charged.
Note: when it is lack of electricity, the red light keeps blinking, please charge it on time, when it is fully charged, disconnect the camera promptly.
  
Playback
After recoding, connect the camera to the computer by USB cable under power off mode to playback the files. Before connecting, please make sure the computer has been installed the related player software.
 
Used as a Web cam
1)Before using it, we must install the driver software named STK02N.TXT, the driver is in the user manual CD.
2)Turn on the device then connect to the computer, there will be a standard video equipment appearing, then the equipment can be used as a webcam.
  
Attention:
1)When recording, if it is lack of electricity, the device will save the data then power off.
2)When recording, the red light and the green light will be blinking all the time indicating its memory is full.
3)The time of PC recognizing the device is different according to its different system and configuration, so please not operate during recognizing. If the device can’t be recognized, please check your computer’s operation system, device drivers, USB port and the USB cable is normal, and then connect the hardware again. 
4)In the adequate light environment, keep the DV vertical and stable, you can get best video and images within a certain distance.
5)As the devise has built-in high-capacity polymer lithium battery, so it has a memory effect .We advise in the first 5 times of usage, charge the battery fully after the battery is out of use, so that the battery can work with its max working hours perfectly.